Saturday, September 06, 2014

Vintage Quilts 101, Part 1

I have just finished quilting two quilts for Julie that are both "rescues".  They are older, vintage quilts of an undetermined age.  Where some of these are simple quilting jobs, others are not as straight forward.  I thought it might be beneficial to discuss some of the nuances of what you may see if a vintage quilt top comes into your quilting studio.  Furthermore, it is wonderful to be able to preserve history, whether it is something from your family or just needing to be preserved.

Here's a look at the finished 66x86 (or so) quilt.  What Julie told me is this.   Her former boss gave her a stack of the hand-pieced 9-patches.  They are about 4-1/2" in the quilt, finished.  She did the rest of the quilt with modern-day fabrics and by machine.

The blocks themselves are kind of messy when viewed from the backside.  I'm not saying this to be critical.  The people that made these hand-pieced tops were not as anal about pressing seams as we are today.  That, coupled with the non-existent 1/4" seam that we are now religious about made for blocks that were less precise.  Afterall, early day quilters were not as concerned with the accuracy as they were about keeping their family warm.
These fabrics are thinner, fraying, and likely NOT color safe.  The other thing I believe from seeing the fabrics is that the lighter fabrics in the blocks appear typical of 1920-1930 fabrics, but the darker ones do not.  They look to be a later genre, probably 50's or even 60's.  They are rougher and may well not be all cotton.  
Like I said, I have done a few other vintage tops for Julie, and on a couple of them we added a muslin liner.  This is just a prewashed/pressed piece of muslin placed between the batting and the top, intended to even out the colorations of the fabrics.  It is common that some are very thin, almost sheer, and others are thicker.   It also puts a fabric at all locations, when having gaps  (holes) where piecing comes together is not really uncommon.  On this top, Julie sent me the liner, but upon close inspection of these blocks, I realized that there was a greater risk at hand.  If the minute and fraying seam allowances were not tended to, even with a liner, the blocks were destined to fall apart.

The solution I went with was using the thinnest weight fusible I could locate.  I cut 88 5" squares of it, and fused them only onto the 9-patches.  Her other fabrics were plenty thick.  This would keep the seams from pulling out, and it barely affected the quilt's hand whatsoever.  I also decided after this was done that the muslin liner was not really needed.  The blocks were not sheer, in fact the thinnest fabrics were the darker ones, and they were now stabilized.
 The Quilting...
One of the issues still staring me in the face was the fact that the 9-patches were not symmetrical. The squares were all different sizes, and it was very visible.  The way I chose to mask this was to turn the viewer's eye to the background, and away from the 9-patches.  I needed to do a pattern on the backound that was pretty.  We could have just done an edge-to-edge at this point, but that wouldn't have been nearly as attractive.  Feathers were my choice, with a simple framed arc-shaped border. The arc border just creates enough of another pattern that the non-squareness of the squares of the 9-patches is less obvious. 

I should note that this is quilted with Hobbs 80/20 batting and a Superior Omni thread in cream.  I chose the Omni because I do prefer to longarm with the polyester threads, and this happens to be low/no sheen and resembles a good cotton hand quilting thread.  It's 40wt.
 The outer border is busy fabric, so feathers and intricate designs would be wasted there.  Piano keys fit the bill just fine.
 Within each of the 88 blocks, I ditch stitched the 9-patch.  This was done for 2 reasons.  First it looks good to have a crisp edge, but more importantly, if for some reason (with use and washing) that interfacing were to gradually want to lift, this will keep it from going anywhere.  Remember, I cut the interfacing 1/4" wider than the block itself.  Though it proved slightly challenging, I chose to quilt continuous curves within these 9-patches.  The end effect really does not indicate that the blocks are nor all of a consistent size.  Just what I hoped it would do.
 Here's a peek at the back.  It has nice texture.  It is great to be able to save an older quilt and preserve it for future generations, or just to be able to use it!
 Tune in next time when I show you a vintage double wedding ring quilt that had a much rockier start!  The end result is just as lovely.



11 comments:

Bev said...

You are amazing! Everything you do looks like a masterpiece. I SO wish I had the money to send you a quilt. sigh...

Quiltdivajulie said...

Incredible! I LOVE IT!!!!!

Leah said...

Great post. Thanks for all the tips. I have an older quilt top that I want to quilt so these ideas have come at the right time. Great quilting too. Beautiful all over.

Kathryn The Quilter said...

Thank you for sharing. These quilts are challenging but so much more doable when we have some guidance.

Kathryn The Quilter said...

Thank you for sharing this. These quilts are important but so challenging. It's wonderful to have a bit if guidance.

Marj said...

Thanks for the info. I am currently working on some tops that were made by a 97 year old Mother of a man with terminal cancer that wants to give the finished quilts to his Granddaughters. The tops are pretty wonky but once quilted they look so much better. Your posts about how to handle these old tops are really helpful.

Vicki W said...

You turned it into a treasure!

Michele said...

Thank you for this great info on how to deal with issues on a vintage quilt. Who knows if I'll ever have one come my way but if I do I know have some great tips on how to deal with the potential problems.

Rebecca Grace said...

Wow -- the fusible backing was a stroke of genius! I love the way your quilting is designed to mask the inaccuracies of the quilt top and show it off in the best possible way. Too bad that the original quilter who hand pieced those blocks will never see the gorgeous quilt they ended up in!

Vivian said...

Margaret, as always your quilting is phenomenal but also the advice you give here regarding prepping vintage quilt tops for quilting is so great!

Since I can't print it out, could you offer this post to MQU as a possible future issue article? I have a subscription so wouldn't have to worry about missing it if it got published.

Vivian said...

Margaret, as always your quilting is phenomenal and the advice you give here on prepping vintage tops for quilting is just great!

Since I can't print this out, would you consider offering this to MQU as a future article? I have a subscription so would be sure to get it if it were published.